BSGSP - EPOXYBOND PLUMBER SEAL RESIN PART A
- MSDS: BSGSP
- Manufacturer: ATLAS MINERALS AND CHEMICALS INC
- Product Name: EPOXYBOND PLUMBER SEAL RESIN PART A
- National Stock Number: 8040-00N040843
Product Identification
Product ID:EPOXYBOND PLUMBER SEAL RESIN PART A
MSDS Date:04/10/1987
FSC:8040
NIIN:00N040843
Kit Part:Y
MSDS Number: BSGSP
Responsible Party
MERTZTOWN, PA 19539-0038
US
Emergency Phone: 215-682-7171;215-682-7172
Info Phone: 215-682-7171;215-682-7172
Cage: 04503
Contractor
Telephone: 215-682-7171
Cage: 04503
Ingredients
BISPHENOL A DIGLYCIDL ETHER RESIN; (BISPHENOL A EPOXY
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 20-25%
STYRENE POLYMER; (POLYSTRENE RESIN)
CAS: 9003-53-6
RTECS: WL6475000
Fraction By Weight: 0-2%
CALCIUM CARBONATE; (NATURAL CALCITE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 65-75%
ACGIH TLV: 30 MPPCF (MFR)
SILICON DIOXIDE, AMORPHOUS
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 2-5%
ACGIH TLV: 10 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: CONTACT MAY CAUSE
IRRITATION. INHAL: MAY RESULT IN IRRITATION TO THE RESPIRATORY
TRACT AND MUCOUS TISSUES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH CLEAR WATER FOR AT LEAST 15 MINUTES. IF
IRRITATION PERSISTS GET MEDICAL ATTENTION. SKIN: WASH CONTACT AREA
WITH MILD SOAP AND WATER. INGEST: DO NOT INDUCE VOMITING. GET
MEDICAL ATTENT ION. INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE
O*2/ARTF RESP) .
Fire Fighting
Flash Point Method:COC
Flash Point:518F,270C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY BE INEFFECIVE. COOL SURROUNDING
AREA WITH WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SCRAPE OFF WITH SUITABLE TOOL AND COLLECT IN
APPROPRIATE CONTAINERS FOR DISPOSAL. FLUSH AREA WITH WATER. KEEP
OUT OF WATER SUPPLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL DRY PLACE. DO NOT TAKE
INTERNALLY. FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL: PREFERABLE.
Protective Gloves:PLASTIC/RUBBER, IF DESIRED.
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:MINIMAL
Vapor Density:HVR/AIR
Spec Gravity:2
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED STIFF PUTTY WITH CHARACTERISTIC MILD ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS, BASES, AMINES AND MERCAPTANS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ALDEHYDES, CARBON MONOXIDE &/OR CARBON
DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WTIH APPLICABLE LOCAL,
STATE AND FEDERAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.